Free delivery on orders over £150. Orders below £150 are charged at £10 carriage. Dismiss
Skip to content| Tube Size | 4, 6, 8, 10, 12 |
|---|---|
| Thread Size | 1/4", 1/8", 3/8", 1/2" |
The Sang-A BSPT Male Thread 45° Push-Fit Elbow changes the direction of the line by 45°. Sang-A push-fit fittings connect pneumatic tube without tools: push the tube in to connect and press the release collet to disconnect.
Push-in fittings are used throughout pneumatic systems: on cylinders, valves, air preparation units, manifolds and machine control panels. They suit factory automation, packaging lines, assembly equipment, vehicle and trailer air systems, and any installation where air lines need to be connected, rerouted or replaced quickly.
Match the tube size to the outside diameter of your tube, and use calibrated nylon or polyurethane tube cut square with a proper tube cutter. Where the fitting has a thread, check whether the port is parallel (BSPP) or taper (BSPT): parallel threads seal on a washer or O-ring at the face, taper threads seal on the thread itself. Check the working pressure and temperature of both the fitting and the tube for your application.
How do I release the tube from a push-in fitting?
Make sure the line is depressurised, then press the release collet evenly towards the fitting body and pull the tube out. Before re-inserting, trim the tube end square so it seals properly.
What options are available for the Sang-A BSPT Male Thread 45° Push-Fit Elbow?
It is available in tube size 4, 6, 8, 10, 12; thread size 1/4", 1/8", 3/8", 1/2". Choose your option from the drop-down menus above before adding it to your basket.
Browse our full range of Sang-A push-in fittings.
Need help or a quote for larger quantities? Contact Simpson Components at sales@simpsoncomponents.co.uk and our team will help you find the right part.