If you need to replace a pneumatic cylinder, the quickest route is usually to match it to an ISO standard. This guide to ISO cylinder standards explains the three main standards for pneumatic cylinders, the sizes each one covers, how to identify the cylinder you have, and how ISO standard cylinders let you swap between brands without changing your mountings.
What is an ISO standard cylinder?
An ISO standard cylinder is built to dimensions set by the International Organization for Standardization. The standard fixes the mounting dimensions, the piston rod thread, the port thread and the overall length for each bore size. It does not dictate how the cylinder is made inside. So any two cylinders built to the same ISO standard, with the same bore and stroke, will fit the same mountings and connect to the same rod accessories, whoever made them.
The three main ISO cylinder standards
| Standard | Type of cylinder | Bore sizes | Replaces |
|---|---|---|---|
| ISO 15552 | Profile barrel and tie-rod cylinders for general industrial automation | 32mm to 320mm | ISO 6431, VDMA 24562 |
| ISO 6432 | Round-bodied mini cylinders for light-duty automation | 8mm to 25mm | – |
| ISO 21287 | Compact (short-body) cylinders where space is tight | 20mm to 100mm | – |
ISO 15552
ISO 15552 is the most widely used ISO cylinder standard. It covers double acting cylinders with a profile barrel or tie rods, in bores of 32, 40, 50, 63, 80, 100, 125, 160, 200, 250 and 320mm. It replaced the older ISO 6431 and VDMA 24562 standards, which share the same key dimensions. A cylinder sold as ISO 6431 or VDMA will usually be replaced directly by an ISO 15552 cylinder of the same bore and stroke.
ISO 6432
ISO 6432 covers round, stainless-bodied mini cylinders from 8mm to 25mm bore. They are used for light pushing, ejecting and positioning on small machines, packaging lines and assembly equipment. They are available single acting (spring return) or double acting, with or without cushioning.
ISO 21287
ISO 21287 covers compact cylinders with a much shorter body than ISO 15552, from 20mm to 100mm bore. Choose them where there is not enough room for a full-length cylinder, such as in fixtures and clamping applications.
ISO 15552 dimensions by bore
These are the standard dimensions most often used to identify an ISO 15552 cylinder:
| Bore | Piston rod diameter | Rod thread | Port thread |
|---|---|---|---|
| 32mm | 12mm | M10 x 1.25 | G1/8 |
| 40mm | 16mm | M12 x 1.25 | G1/4 |
| 50mm | 20mm | M16 x 1.5 | G1/4 |
| 63mm | 20mm | M16 x 1.5 | G3/8 |
| 80mm | 25mm | M20 x 1.5 | G3/8 |
| 100mm | 25mm | M20 x 1.5 | G1/2 |
| 125mm | 32mm | M27 x 2 | G1/2 |
ISO 6432 rod threads
| Bore | Rod thread |
|---|---|
| 8mm and 10mm | M4 |
| 12mm and 16mm | M6 |
| 20mm | M8 |
| 25mm | M10 x 1.25 |
How to identify your cylinder
- Check the label. Most cylinders are marked with the manufacturer’s part number, which usually includes the bore and stroke. Many also state the ISO standard.
- Look at the body. A round stainless barrel under 25mm bore is almost always ISO 6432. A square or profiled aluminium barrel with a square end cover is usually ISO 15552. A very short square body is likely ISO 21287.
- Measure the piston rod and its thread, and compare them with the tables above. The rod diameter is the quickest way to confirm the bore.
- Measure the stroke: the distance the rod travels from fully retracted to fully extended.
- Note the mountings (foot, flange, hinge or trunnion) and the rod end accessory, so you can reuse or replace them.
Can I replace an SMC or Festo cylinder with another brand?
Yes, if both are built to the same ISO standard. For example, SMC’s CP96 and Festo’s DSBC ranges are ISO 15552 cylinders, and SMC’s C85 and Festo’s DSNU ranges are ISO 6432 mini cylinders. A Metal Work ISO 15552 cylinder of the same bore and stroke uses the same mountings, rod thread and port size, so it can replace them without changing your brackets. Always check the details of the cylinder you have, including any options such as magnetic pistons for position sensors.
Single acting vs double acting
A double acting cylinder uses compressed air to both extend and retract the rod, so it has two ports. On a circuit diagram (ISO 1219), it is drawn as a rectangle with the piston and rod inside and an air connection at each end. A single acting cylinder has one port and uses a spring to return the rod, and its symbol shows the spring inside the barrel.
Shop ISO cylinders and accessories
- ISO pneumatic cylinders: Metal Work ISO 15552 cylinders from 32 to 125mm bore and ISO 6432 mini cylinders from 10 to 25mm bore.
- ISO 15552 cylinder accessories: foot and flange mountings, hinges, rod eyes, front forks and swivel rod couplers.
- Pneumatic valves and flow control valves to control your cylinder.
Not sure which cylinder you have? Send a photo and the markings to sales@simpsoncomponents.co.uk and our team will identify the replacement for you.



